The Taylor lute has a body made of solid lacewood staves, a rosewood fret board on a maple neck. The peg box is maple with a rosewood veneer and the tuners are ebony. The soundboard is made out of European spruce with a rosewood bridge and rosewood end pin. There are six nylon frets and six rosewood frets. The nut width is 67mm.

The 7 and 8 course Renaissance lutes designed by Zachary Taylor are based on an instrument made by Hans Frei, the original of which may be seen in the Warwick Museum in England. This lute was made in Bologna about 1540 and since then may have been the subject of conversions to the stringing and the soundboard. Apart from shortening the string length from 670mm to 600, for ease of left-hand fingering, the instruments follow Hans Frei's principles of construction. Hard case included.

Scratch & Dent Savings!!! Product codes ending in "-2" are Blemished. They are New and Unused with Superficial blemishes that may include, blisters in the finish, scratches, dents, stains, discoloration, rust or pitting on metals, imperfect glazes, non-structural repairs such as putty in nail holes, or other surface marks. The irregularity does not affect the playability or sound quality of the instrument. These are a good value.