Shop By Category
|
|
|
Aviom 6416o Output Module |
|
SAVE $180.00 When You Buy Today! |
|
|
MSRP Price: $2869.95
Our Price: $2689.95 |
|
|
|
|
| |
The 6416o provides sixteen balanced mic- or line-level analog outputs from a Pro64 audio network.
Features:
- 16 balanced mic- or line-level analog ouputs (XLR)
- DB25 alternate audio outputs
- Three-segment level meter per channel
- Individual channel activation switches
- Virtual Data Cable connectivity for GPIO, MIDI, and RS-232
- Variable sample rates: 44.1kHz± to 192kHz±
- 24-bit D/A converters
- Internal universal power supply; IEC power connector
The 6416o Output Module provides 16 balanced mic- or line-level analog outputs from a Pro64 A-Net network. Each channel includes a two-position output level switch (mic or line) and three-segment level metering. Alternate audio outputs are provided via DB25 multipin connectors on the rear panel.
Each 6416o can be configured to operate within a specified channel/slot range within the Pro64 network, making complex installations easy to configure and manage. Each output channel of a 6416o can be made active as needed.
The Pro64 A-Net network supports three ranges of variable sample rates: 44.1/48kHz±, 96kHz±, and 192kHz±. No matter the sample rate, all 16 output channels on the 6416o are available for use. All audio is streamed at 24-bit resolution with no data compression at any time.
In addition to its audio capabilities, the 6416o also includes the innovative Virtual Data Cables™ for simultaneously distributing up to 14 channels of non-audio control data such as MIDI, RS-232, and GPIO to any device on the Pro64 network. Every Pro64 I/O module comes with its own set of VDC™ ports that can be individually configured.
The 6416o can be used anywhere analog outputs are required: on stage or FOH in a digital snake, in the studio, or in even the most complex audio networks. Adding a digital split to a system is as simple as connecting an additional 6416o.
Specifications:
Channels: 16 outputs Mic or line level
XLR Outputs: Pin 1:
Shield; Pin 2: Hot; Pin 3: Cold
Impedence balanced; Signal on hot only
Alternate Audio Outputs: DB25 multipin; audio pinout
Output Impedance: 91 Ohms
Output Levels: +4dBu, -17dBu 2-position switch
Sample Rates:
1x: 39.7-52kHz; 2x: 79.4-104kHz;
4x: 158.8-208kHz 24-bit resolution
Frequency Response:
-3dB: 2Hz and 23kHz
±0.5dB: 3Hz-22kHz (at 1x sample rate)
THD+N: < .002% at -10dBFS
Signal to Noise: A/D: -111dB (unweighted)
Crosstalk: <100dB at 1kHz
Maximum Ambient Temperature: 50°c
Virtual Data Cables:
MIDI In, MIDI Out
5-pin DIN
RS-23
DB9 connector; DIP switch configuration
GPIO
In (x4), Out (x4); terminal block connectors;
DIP switch configuration; TTL or isolated
A-Net: 2 EtherCon® RJ45 connectors
A-Net Cable Length: 400 feet (120 meters) between devices
Latency: Analog input to analog output: <800µs
Power Supply:
100-240VAC
50-60Hz, 24W
Internal switching type; IEC connector
Dimensions: 2U: 19"w x 8"d x 3.5"h (482.6 x 203 x 88 mm)
Weight: 9 pounds (4.1 kilo)
|
| You may be interested in:
|
|
|
|